EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 129)

SD OUT (in HD and SD)
D-VITC
Description Enables/disables the insertion of the embedded timecode (D-
VITC) in the SD output.
Values The values specified for the D-VITC field can be as follows:
• No No new timecode inserted in the output.
• In (default)
Same timecode as in the input inserted in the
output.
• LTC
Timecode from the LTC table inserted in the
output.
• USER User-defined timecode inserted in the output.
• TC 0
All D-VITC timecodes generated in the video
signal coming out of the given PGM will
remain static and fixed to 00:00:00:00.
Lines
Description Lines on which the specified timecode must be written on the
loop of the input.
Values From 06-08 to 20-22
Default Values • 14-16 in NTSC
• 19-21 in PAL
UserBits
Description Enables/disables the insertion of the user bits in the SD
output.
When TC0 is selected for the D-VITC field, the user bits
values will also remain static and fixed to 00:00:00:00
whatever the selected value.
Values Yes (default) / No
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 121