EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 17)

# Name of area Description
5. Task bar The Task bar (Server-based application) displays
commands for the main actions in the window.
See section "Navigability and Commands" on page 9
for more information.
5'. Status bar The Status bar (web-based interface) displays:
• the Multicam Setup application status
• the date and time of the last refresh
• the Refresh button
6. Server Information This area displays the following information on the EVS
server:
• genlock status (OK or bad)
• timecode and timecode status (OK or bad)
• IP address of the LAN PC
2.1.2. Navigability and Commands
In the Server-Based Application
General Navigability
The following table presents the general commands to navigate in the Multicam Setup
window:
Command description Command key
Moving the cursor to the first item of the Tools menu F9
Moving the cursor to the first configuration line ESC
Moving down in the list of editable items
(configuration lines and Tools commands) TAB
Moving up in the list of editable items SHIFT+TAB
Displaying a Help window that gives a summary of
the commands F1
CONFIGURATION MANUAL XS Server 11.02
2. Multicam Setup 9