EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 145)

3.6.4. Downconverted Outputs Settings
User Interface
The Downconverted outputs settings allow specifying the settings related to the
downconverted output lines and the downconverter parameters.
Warning
Some settings in this section (Char OUT J4/J1 OUT BJ3, Aspect ratio) require
an application reboot (ALT+Q from the operational windows) for changes to be
taken into account.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Monitoring tab
• in the Technical menu of the Remote Control Panel (T4.2)
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Downconverted outputs settings area.
Char OUT J4
Description Specifies the monitoring output type generated on the J4
connector.
Values • SD
• HD
Default value System dependent
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 137