Rs422 varid settings, Vdcp visibility settings, Use either the default value or the varid (see – EVS XS Version 11.02 - July 2013 Configuration Manual User Manual
Page 160: Rs422 varid, Settings, Tc h-pos, Name h-pos, Tc v-pos, Name v-pos, User interface
TC H-Pos
Description
Defines the horizontal position of the TC on the screen.
Values
0 to 9
Default value
4
Name H-Pos
Description
Defines the horizontal position of the edit name on the screen.
Values
0 to 15
Default value
0
TC V-Pos
Description
Defines the vertical position of the TC on the screen.
Values
0 to 11
Default value
10
Name V-Pos
Description
Defines the vertical position of the edit name on the screen.
Values
0 to 11
Default value
0
3.7.6.
RS422 VarID Settings
User Interface
The RS422 VarID settings and the VDCP visibility settings display the read-only VarID
settings.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Protocol tab, on page 4 in the advanced display
mode in the server- and web-based interfaces.
Warning
The VDCP visibility settings are only available if the license code 119, required
to work with the VDCP protocol, is valid.
152
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013