EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 135)

Speed
Description Enables the selection of the SDTI option and the bandwidth for
the network.
On the XS server, there is one pair of SDTI connectors: XNet2
Non-Relay connectors are used at 1485 Mbps.
The SDTI circuit is closed only when the Multicam software is
started.
Values No Relay 1485 (Mbps) / Off
Net Name
Description Machine name on the SDTI network.
It is not mandatory because a network number is assigned to
the EVS server. It is however recommended to easily identify
all servers connected to the XNet network.
The Net Name will be displayed even if the SDTI code is not
valid.
Values The Net Name is user-defined and cannot exceed 8
characters.
Default Values By default, no Net Name is assigned.
Net Number
Description The Net Number parameter defines the machine number on the
network. This number is user-defined and must be unique for
each system on the network. An error message appears if the
number is already assigned to another machine.
Values Range between 1 and 29
Default 1
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 127