EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 105)

Clip Capacity
Description Recording mode on the record channels.
Values The following values are available: Global / Per channel
• Global:
In this mode, the clip capacity is shared between the
different record trains.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 10 min of recording capacity
equally from each record train.
• Per channel:
In this mode, the clip capacity is only relevant to the
individual record train.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 30 min of recording capacity from
the 1
st record train, but will not affect the recording capacity
of the other two record trains.
Default value The default value depends on the base configuration:
• Global (locked):
◦
in XSense configurations
◦ in Video delay configurations
• Per channel:
◦
in Server configurations
Rec Auto Start
Availability This setting is displayed when a Spotbox or Server
configuration is running.
Description Automatic start of the record channels after the EVS server
has initialized.
Values Yes (default) / No
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 97