EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 121)

Audio Analog
By default, the audio mono channels of the A/V material stored on the EVS server are sent
to the analog audio output connectors of the play channels as presented in the table
below.
The table shows the maximum number of players, and an audio configuration with 8
tracks (mono channels):
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6
Mono1 A 01 A 05 None None None None
Mono2 A 02 A 06 None None None None
Mono3 A 03 A 07 None None None None
Mono4 A 04 A 08 None None None None
Mono5 None None None None None None
Mono6 None None None None None None
Mono7 None None None None None None
Mono8 None None None None None None
Modifying the Audio Routing or Type
Introduction
Audio routing settings can be modified in the Advanced Audio Settings pages (p.3-6) of
the Channels tab:
• Changing the audio type for all audio channels of a page at the same time is possible
using the shortcut keys described below. Changes on individual channels are also
possible by manually editing the audio type value.
• Changing the routing of an individual audio channel can be done by editing the cell
value in the advanced audio settings tables.
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 113