EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 137)

Warning
Changes to the Gigabit settings require an application reboot (ALT+Q from the
operational windows) to be applied.
User Interface
The Gigabit IP Configuration settings are available:
• in the Multicam Configuration window, Network tab, in the basic and advanced
display modes on page 1 in the server-, and web-based interface.
• in the Technical menu of the Remote Control Panel (T3.X).
The following screenshot highlights the Gigabit IP Configuration settings, defined on page
1 of the Network tab in the server-based application:
Physical interface
Description This setting is not currently used.
Values -
IP Address (Port 1/Port 2)
Description IP address to connect to the port1/port2 of the Gigabit Ethernet
connection on the EVS server.
Values The IP addresses 0.0.0.0 and 255.255.255.255 are not
allowed.
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 129