VEGA TH LINK Version 1.1 Installation Guide - Manual (Page 18)

Configuring the TH LINK in the Ethernet network
Trebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK
18
Configuring the TH LINK in the Ethernet
network
Establish a connection to the TH LINK
1. Connect the TH LINK to a PC/notebook via crossover cable.
The PC/notebook has to be in the same subnet as the
TH LINK.
2. Start a web browser on your PC/notebook.
3. Enter the IP address http://169.254.0.1 and press
<Enter>. The TH SCOPE website is loaded.
Login
1. Click on Login.
2. Enter the password. The default password is the six-figure
serial number of the device. You can find it on the type label
at the case or at Info.
3. Click on OK.
Note!
We recommend changing the password after
login (see "User administration" on page 20).
Note!
Log out after changing settings (Click on
Logout
). Otherwise you have to wait about 10
minutes to get access to this TH LINK, if you
have left the site or closed the browser.