VEGA TH LINK Version 1.1 Installation Guide - Manual (Page 20)

Configuring the TH LINK in the Ethernet network
Trebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK
20
User administration
Here you can change the password. Proceed as follows:
1. Enter the old password.
2. Select a new password and confirm it by re-entering.
3. Finally, click Change password.
TH LINK description
Here you can enter a tag name, a location, an installation date
and a description of the TH LINK.
Network configuration
Here you have to set the operation mode and the configuration
method. You can also make time settings.
Operation mode
Select at network configuration the operation mode of
the TH LINK.
In the operation mode Passive PROFIBUS station the
TH LINK is a passive station in the bus. Therefore the TH LINK
needs no own PROFIBUS address.
In the operation mode Active/Passive PROFIBUS station
the TH LINK can be used as a class 2 master in connection with
an external master application (FDT or Emerson's AMS Suite).
The TH LINK is passive until a PROFIBUS address is set in the
master application and the communication is started. Then the
TH LINK is an active station.