VEGA TH LINK Version 1.1 Installation Guide - Manual (Page 6)

For your safety
Trebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK
6
– Carefully plan the integration of the TH LINK into an existing
system and ensure proper function of the system after
installation.
– The TH LINK may only be installed or uninstalled by qualified,
trained electrical engineering personnel.
When installing the TH LINK, observe the regulations for
handling electric components in accordance with VDE 0100. In
addition, you must also observe the valid safety and accident
prevention regulations (UVV) when operating the device within
the jurisdiction of the Federal Republic of Germany.
– Observe the IEC 61158 standard.
– Always install the TH LINK on a suitable top-hat rail (mounting
rail).
– Cables used for the connection must not apply any mechanical
forces to the TH LINK.
Warning!
The TH LINK contains electronic components
sensitive to electrostatic discharges. Damages
due to electrostatic discharge can lead to
premature failure of components or intermittent
faults at a later stage.
Before installing the TH LINK, divert the
electrostatic discharge away from your body and
the tools used.