VEGA TH LINK Version 1.1 Installation Guide User Manual
Page 22
Configuring the TH LINK in the Ethernet network
Trebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK
22
Connection in a network with manual IP address assignment
If you use the TH LINK in an Ethernet network without DHCP
server, you need the following for configuration:
– TCP/IP settings for this network
– a PC/notebook with a web browser and Adobe Flash Player
– a crossover cable between PC/notebook and TH LINK (peer-
to-peer connection)
The TH LINK has the following manual default IP addresses
(default settings at the time of delivery):
Note!
Always notify your system administrator prior to
allocating IP addresses.
If you set an address already assigned, other
devices in the network may be deactivated and
communication may be affected.
Note!
The PC/notebook must be in the same subnet
as the TH LINK.
IP address
169.254.0.1
Subnet mask
255.255.0.0
Default gateway
0.0.0.0