VEGA TH LINK Version 1.1 Installation Guide - Manual (Page 26)

TH SCOPE settings
Trebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK
26
Measurement
The measurement settings include among other settings for baud
rate and Start/Stop of the TH SCOPE measurement.
Alert
The alert settings include among other settings for activating the
email alert function, when an email should be sent, SMTP server,
subject, email sender and receiver.
Parameter distribution
The parameter distribution serves for a quick and easy
configuration of several TH LINK. Therfore one TH LINK has to
be set a parameter provider. All other units can request the
parameters from this TH LINK.
Set parameter provider
The TH LINK from which all other units can take over the set
parameters is called parameter provider.
Select the distribution role Parameter provider and save your
settings by clicking on the floppy disk sign.
Note!
Only one "parameter provider" is allowed in the
entire network.
In TH SCOPE network overview > network
list
the parameter provider is marked with the
following icon.