Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA For use with EconoMind Ford (03-09), Chevy(01-08), Dodge (03-07) - Manual (Page 18)

To change between power levels use
the 5-way navigator button (Figure
1).
1.
Press the navigator button up to
increase the displayed power level.
2.
Press the navigator button down
to decrease the displayed power
level.
Note: The selectable power levels
are 1 thru 6. Level 1 produces stock
power and level 6 produces the
maximum power. The selection of
a power level can be done with
the vehicle on, off (when the Banks
PowerPDA is on), or while driving.
-END SEcTION 5-
Section 5
ChANGING PoWEr LEVELS
18
96803 v.7.0
Section 6
SySTEM MENu
Figure 27 Figure 28
1.
Press the center button on the
5-way navigator to move to the
System Menu. The two System
Menu screens have ten labeled
touch screen buttons. See Figures
27 and 28.
2.
To navigate between screens,
touch the ‘More>’ or ‘<Back’
buttons.
Further discussion of each field will
be covered later in the manual.
-END SEcTION 6-