Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA For use with EconoMind Ford (03-09), Chevy(01-08), Dodge (03-07) User Manual
Page 6
Advertising
3.
In the ‘copy From’ drop down
menu select “card”. See Figure 6. The
‘copy To’ selection will automatically
change to “Device” (Figure 7). Select
on the “Banks” name, if it is not
already selected or there is more than
one item in the list. Touch the “copy”
button (Figure 8). A dialog box will
appear, indicating the Palm Tungsten
E2 is copying the software from the
SD card. Once completed, press the
“Done” button.
4.
Select the drop-down menu in the
upper right hand corner of the screen.
Touch the button labeled ‘All’. The
Banks PowerPDA software is now
installed. you may now remove the SD
card from its slot.
5.
To start the Banks PowerPDA
software, touch the icon called
“Banks”. See Figure 9.
-END SEcTION 2-
Figure 9
6
96803 v.7.0
Advertising