Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA For use with EconoMind Ford (03-09), Chevy(01-08), Dodge (03-07) - Manual (Page 5)

The Banks PowerPDA software is
supplied on a Secure Digital (SD)
media card. The software should be
installed on the Palm Tungsten E2
and run from main memory. you can
use the additional space on the SD
card to store music, photos and other
data. Refer to your device instruction
manual for using SD cards to store
data. you should leave a copy of the
Banks PowerPDA software on the SD
card as a backup for future reference.
1.
Insert the SD card into the slot on
the top of the Palm Tungsten E2.
Note: the contents of the SD card
should appear on the screen. (The
“Banks” name). See Figure 7.
2.
Press the ‘Menu’ key on the bottom
of the Palm Tungsten E2 (beneath
the ‘Home’ key). Then select ‘copy’
(Figure 5).
Section 2
INSTALLING ThE BANKS PoWErPDA SoFTWArE
Figure 5
Figure 6
Figure 7
Figure 8
96803 v.7.0
5