Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA For use with EconoMind Ford (03-09), Chevy(01-08), Dodge (03-07) - Manual (Page 19)

96803 v.7.0
19
The Banks PowerPDA is designed,
when in the System Monitor screen,
to turn off when the vehicle is turned
off or when communication is lost
with the EconoMind Tuner. After
communication is lost or the ignition is
switched off the Banks PowerPDA will
turn off in a few moments. If you want
to use the PowerPDA again, it will
have to be turned on again by pressing
the power button to view the gauges.
The Tungsten E2 also has a user
selectable ‘power save‘ feature that
can be programmed by the user. This
will not effect the OFF feature when
connected to the EconoMind Tuner.
1.
From the Tungsten E2 Home Screen
(‘Home’ key), scroll down and locate
the ‘Prefs’ icon.
2.
Touch the ‘Prefs’ icon (Figure 29).
3.
Touch the button labeled ‘Power’ to
enter the edit page (Figure 30).
4.
Touch the button labeled ‘Auto-off
after’. See Figure 31.
5.
Select from the following: 30
seconds, 1 minute, 2 minutes, and 3
minutes. This setting sets the Auto-off
time limit (Figure 32).
6.
Touch the button labeled ‘On while
charging:’, then select either ‘ON’, or
‘OFF’.
Section 7
PoWEr SAVE SETTING
Figure 29
Figure 30
Figure 31
96803 v.7.0
19