Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA For use with EconoMind Ford (03-09), Chevy(01-08), Dodge (03-07) User Manual
Page 23
Note: There are multiple selectable
parameters to choose from. Specific
parameters vary with vehicle
application.
1.
Press the center button on the
5-way navigator to take you to the
System Menu screen.
2.
Next, touch the ‘Gauge Setup’
button. See Figure 27.
3.
The current gauge display will be
shown in G3 and G4 (Figure 38). To
change the displayed parameter, scroll
through and select from the available
parameters.
4.
Use the buttons labeled ‘Up’ and
‘Down’ to scroll through the list.
5.
To select the desired parameter,
highlight it by touching on the
parameter then touch on either the
G3 or G4 gauge button. The respective
gauge display will change accordingly.
6.
Press the ‘Back’ button twice or the
center button on the 5-way navigator
to return to the System Monitor screen.
The System Monitor screen will now
display your new G3 and G4 parameters.
-END SEcTION 9-
Section 9
GAuGE SET-uP
Figure 38
96803 v.7.0
23