Grain Systems PNEG-1276 - Manual (Page 59)

9. Assembly
PNEG-1276 Top Dry Autoflow Construction Manual 24', 30' and 36' 59
42" Fan Diffuser Instructions and Installation (Continued)
Attach front plate to the top plate with four (4) 1/4" x 1" self-drilling screws.
Bolt the side brackets to the front plate slot with the angle outward. Field drill two (2) holes (on inside
corrugation hills) through the sidewall and install 5/16" x 3/4" bin bolts and nuts.
Position the side plates on each side with the angle outward and fasten in place using six (6) 1/4" x 1"
self-drilling screws.
(See Figure 9J.)
NOTE: The corner bolt will need to be removed through the side plate, side bracket and front plate.
Figure 9J
Side bracket
(TD-100656) (2)
Left side plate
(TD-100664)
5/16" x 3/4"
Bin bolt and nut
Self-drilling
screws (S-7229)
Front plate
(TD-100665)
5/16" x 3/4"
Bin bolt and nut
Self-drilling
screws (S-7229)
Right side plate
(TD-100663)
Top plate (TD-100665)