Grain Systems PNEG-1276 - Manual (Page 67)

9. Assembly
PNEG-1276 Top Dry Autoflow Construction Manual 24', 30' and 36' 67
Cross Over Platform Assembly for Use with Stairs (TDP-5013)
Before assembly of any platform, read the entire instructions to assure proper placement and assembly.
Refer to Figure 9U for proper location of cross over platform. Begin by assembling the cross over platform
support frame using 5/16" x 3/4" truss head bolts and nuts. When attaching platform vertical support to bin
sidewall field drill sixteen (16) 3/8" diameter holes for each support spaced every 4". Be sure and use
5/16" x 3/4" bin bolt on vertical support to sidewall. Special attention should be taken when assembling
the platform support that the support brace is placed correctly.
Now proceed to the platform floor. Align holes on platform floor with holes on platform support and bolt
together using 5/16" x 3/4" truss head bolt and nuts. Next, assemble handrail posts, handrails, and
handrail braces.
Figure 9U
Ref # Part # Description Qty Weight
1 LS-371 Platform Vertical Angle 2 7.59
2 TDP-5001 Handrail 27" 2 4.63
3 TDP-5003 Handrail Brace 36-29/32" 2 6.34
4 TDP-5004 Short Floor Brace 26-1/2" 3 11.85
5 TDP-5006 Platform Floor 37-7/8" 1 19.11
6 TDP-5007 Support Brace 50-21/32" 2 15.08
7 TDP-5008 Sidewall Brace 58" 2 19.65
8 TDP-5009 Platform Support 43-1/2" 2 12.95
N/S TDP-5015 Cross Over Platform Hardware Package 1 3.95