Grain Systems PNEG-584 - Manual (Page 18)

18
SERIES TWO HEATER
Adjusting the vaporizer coil on a liquid propane model.
The top photo shows the setting up (cool),
and the bottom photo shows the coil down (hot).
ADJUSTING THE
VAPORIZOR
1. Vaporizer should be adjusted so
the vapor pipe train runs warm
to the touch (100°-120°F).
2. Loosen 5/16" bolts on adjust-
ment bracket.
3. Raise vaporizer if running too
hot, lower if too cold.
4. Move vaporizer only 1" at a
time and allow a few minutes for
temperature to equalize.
5. Tighten 5/16" bolts and watch
heater run for several minutes
to verify adjustment.
HEATER OPOERATION PROCEDURE