Grain Systems PNEG-584 - Manual (Page 6)

6
SERIES TWO HEATER SAFTY ALERT DECALS
SAFETY FIRST
General Safety Statements
The GSI Group Inc’s Principal concern is your
safety and the safety of others associated with grain
handling equipment. We want to keep you as a cus-
tomer. This manual is to help you understand safe
operating procedures and some problems which may
be encountered by the operator and other personnel.
As owner and/or operator, it is your respon-
sibility to know what requirements, hazards and pre-
cautions exist and inform all personnel associated with,
or in the area of the Fill/Feed System. Safety pre-
cautions may be required from the personnel. Avoid
any alteration to the equipment. Such alterations may
produce a very dangerous situation, where serious
injury or death may occur.
This product is intended for the use of con-
veying feed only. Any other use is a misuse of the
product!
This product has sharp edges! These sharp
edges may cause serious injury. To avoid injury handle
sharp edges with caution and use proper protective
clothing and equipment at all times.
The GSI Group Inc. recommends that you
contact your local power company and have a repre-
sentative review your installation so your wiring will
be compatible with their system and so that you will
have adequate power supplied to your unit.
The Chain Disk drive unit weights 159 lbs
(72kg). All precautions should be taken when lifting
and/or moving. Use at least two men when moving
the unit anywhere.
The safety pages that follow are to show you
where you can find the safety decals. The photo-
graphs show exactly where the decals should be. If a
decal has been damaged or is missing contact The
GSI Group, Inc. for a free replacement.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious in-
jury
WARNING indicates a potentially hazardous situation
which , if not avoided, could result in death or serious
injury.
DANGER
This is the safety alert symbol.
It is used to alert you to po-
tential personal injury hazards.
Obey all safety messages that
follow this symbol to avoid possible injury
or death.
WARNING
CAUTION
CAUTION used without the safety alert symbol indi-
cates a potentially hazardous situation which, if not
avoided, may result in property damage.
BE ALERT!
Danger!
Personnel operating or work-
ing around electrical equip-
ment should read this manual.
This manual must be delivered with equipment to
its owner. Failure to read this manual and its safety
instructions is a misuse of the equipment.
CAUTION
CAUTION indicates a potentially hazardous situa-
tion which, ifnot avoided, may result in minor or
moderate injury.