Installing the card into a frame slot – Cobalt Digital COMPASS 9322 HD_SD De-Embedder User Manual
Page 32
![background image](/manuals/280013/32/background.png)
2
Installing the Card Into a Frame Slot
2-2
9323 GROUP PRODUCT MANUAL
9323G-OM (V4.6)
Figure 2-1 9323 AES I/O (1-4) Mode Switches
Installing the Card Into a Frame Slot
CAUTION
Heat and power distribution requirements within a frame may dictate specific
slot placement of cards. Cards with many heat-producing components should
be arranged to avoid areas of excess heat build-up, particularly in frames
using only convection cooling. This card has a moderate power dissipation
(15 W max.). As such, avoiding placing the card adjacent to other cards with
similar dissipation values if possible.
CAUTION
Note:
If installing the card in a slot already equipped with a suitable I/O module, pro-
ceed to card installation steps below.
Rear of Card
S11 S12 S13 S14
INPUT MODE
(Factory Default)
OUTPUT MODE
AES I/O 1
AES I/O 2
AES I/O 3
AES I/O 4
•
•
•
•
This device contains semiconductor devices which are
susceptible to serious damage from Electrostatic
Discharge (ESD). ESD damage may not be immediately
apparent and can affect the long-term reliability of the
device.
Avoid handling circuit boards in high static environments
such as carpeted areas, and when wearing synthetic fiber
clothing. Always use proper ESD handling precautions
and equipment when working on circuit boards and
related equipment.