Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 41)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 2-11
Installation and Setup
Installing a Rear I/O Module
RM20-9321-E Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES coaxial audio inputs (AES IN 1 thru
AES IN 4)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Dolby ® RS-485 metadata output (DOLBY META)
• Two buffered SDI coaxial outputs (SDI OUT)
RM20-9323-D Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two dedicated AES coaxial audio outputs
(AES OUT 1 and AES OUT 2)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Dolby ® RS-485 metadata output (DOLBY META)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: AES OUT 1 and AES OUT 2 on
RM20-9323-D Rear I/O Module always
function as outputs regardless of whether
AES I/O 1 or AES I/O 2 are used as inputs or
outputs.
Note: For AES I/O 1 thru AES I/O 4 on
RM20-9323-D Rear I/O Module to function as
inputs, AES I/O switches S11 – S14 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (9321, 9323 Only) (p. 2-1) for more
information.
Table 2-1 932X Rear I/O Modules — continued
932X Rear I/O Module Description