Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 67)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 3-17
Operating Instructions
932X Group Function Submenu List and Descriptions
(continued)
• Down Mix Left or Right as Source Down Mix Left and Down Mix Right selections in Source drop-down list
allow either downmixer left or right channel to be the source for the
selected destination Embedded Audio Group channel.
(In this example, the Down Mix Left channel is the source for destination
Embedded Ch 1)
Note: Down Mix Left and Down Mix Right channels are a stereo pair
derived from the L, C, R, Ls, and Rs channel inputs selected using
the Audio Mixing function. The stereo pair consists of basic L/R
PCM signals with no additional encoded information.
Refer to Audio Mixing function description on page 3-35 for more
information.
• Mono Mix as Source Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination Embedded Audio Group channel.
(In this example, the mono content is the source for destination
Embedded Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-35 for more information.
• Dolby ® Decoded Channel as Source (+DEC only) Dolby Ch 1 thru Dolby Ch 8 range in Source drop-down list
enables a Dolby
® decoded channel to be the source for the selected
destination Embedded Audio Group channel.
(In this example, Dolby ® decoded Ch 1 is the source for destination
Embedded Ch 1)
Note: Drop-down choices of Ch 1 thru Ch 8 and Mix 1/Mix 2 represent
maximum channels available. Actual active channel complement is
per received Dolby
® format and upstream encoding. Inactive
channels should not be used.
Refer to Dolby Decoder function description on page 3-30 for more
information.
Refer to Dolby ® E Processing and Routing Example on page 3-43
for an example of using and routing Dolby
®
decoding.
• Tone Generator 1 thru 4 as Source Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination Embedded Audio Group channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
Embedded Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-40 for
more information.
Table 3-2 932X Group Function Submenu List — continued
•
•
•