Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 47)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 2-17
Installation and Setup
Installing a Rear I/O Module
RM20-9322-G Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Eight AES coaxial outputs (AES OUT 1 thru
AES OUT 8)
• SDI coaxial output (SDI OUT)
RM20-9323-J Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Two HD/SD-SDI reclocked input copies
(RCK OUT 1 and RCK OUT 2)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• RS-485 metadata output (DOLBY META)
• Two buffered SDI coaxial outputs (SDI OUT 1 and
SDI OUT 2)
Note: For AES I/O 1 thru AES I/O 4 on
RM20-9323-J Rear I/O Module to function as
inputs, AES I/O switches S11 – S14 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (9321, 9323 Only) (p. 2-1) for more
information.
Table 2-1 932X Rear I/O Modules — continued
932X Rear I/O Module Description