Troubleshooting, Troubleshooting -45, Error and failure indicator overview -45 – Cobalt Digital COMPASS 9322 HD_SD De-Embedder User Manual
Page 95: Troubleshooting (p. 3-45), Operating instructions
9323G-OM (V4.6)
9323 GROUP PRODUCT MANUAL
3-45
Operating Instructions
Troubleshooting
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the card and its remote control interface.
A 932X group card require no periodic maintenance in its normal operation;
if any error indication (as described in this section) occurs, use this section to
correct the condition.
Error and Failure Indicator Overview
The card itself and its remote control systems all (to varying degrees) provide
error and failure indications. Depending on how the card is being used (i.e,
standalone or network controlled through DashBoard™ or a Remote Control
Panel), check all available indications in the event of an error or failure
condition.
The various card and remote control error and failure indicators are
individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-49)