Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 45)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 2-15
Installation and Setup
Installing a Rear I/O Module
RM20-9323-G Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Four dedicated AES coaxial audio inputs
(AES IN 5 thru AES IN 8)
• Eight dedicated AES coaxial audio outputs
(AES OUT 1 thru AES OUT 8)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Two HD/SD-SDI reclocked input copies
(RCK OUT)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: AES OUT 1 thru AES OUT 4 on
RM20-9323-G Rear I/O Module always
function as outputs regardless of whether
AES I/O 1 or AES I/O 2 are used as inputs or
outputs.
Note: For AES I/O 1 thru AES I/O 4 on
RM20-9323-G Rear I/O Module to function as
inputs, AES I/O switches S11 – S14 must be
set to Input (factory default). See Setting I/O
Switches for AES I/O (1-4) Ports (9321, 9323
Only) (p. 2-1) for more information.
Table 2-1 932X Rear I/O Modules — continued
932X Rear I/O Module Description