Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 43)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 2-13
Installation and Setup
Installing a Rear I/O Module
RM20-9323-E Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Three dedicated AES coaxial audio inputs
(AES IN 5, AES IN 6, AES IN 8)
• Eight dedicated AES coaxial audio outputs
(AES OUT 1 thru AES OUT 8)
• Dolby ® RS-485 metadata output (DOLBY META)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: AES OUT 1 thru AES OUT 4 on
RM20-9323-E Rear I/O Module always
function as outputs regardless of whether
AES I/O 1 thru AES I/O 4 are used as inputs
or outputs.
Note: For AES I/O 1 thru AES I/O 4 on
RM20-9323-E Rear I/O Module to function as
inputs, AES I/O switches S11 – S14 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (9321, 9323 Only) (p. 2-1) for more
information.
RM20-9323-F Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Five AES coaxial inputs (AES IN 1 thru AES IN 4,
AES IN 8)
• Two dedicated AES coaxial audio outputs
(AES OUT 1 and AES OUT 2)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: For AES I/O 1 thru AES I/O 4 on
RM20-9323-F Rear I/O Module to function as
inputs, AES I/O switches S11 – S14 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (9321, 9323 Only) (p. 2-1) for more
information.
Table 2-1 932X Rear I/O Modules — continued
932X Rear I/O Module Description