Accessing the card via remote control, Accessing the card via remote control -5, Accessing the card using dashboard™ -5 – Cobalt Digital COMPASS 9322 HD_SD De-Embedder User Manual
Page 55: Accessing the card via remote control (p. 3-5), Operating instructions
9323G-OM (V4.6)
9323 GROUP PRODUCT MANUAL
3-5
Operating Instructions
Accessing the Card via Remote Control
Accessing the Card via Remote Control
Access the card using DashBoard™ or Cobalt
®
Remote Control Panel as
described below.
Accessing the Card Using DashBoard™
1.
On the computer connected to the frame LAN, open DashBoard™.
2.
As shown below, in the left side Basic View Tree locate the Network
Controller Card associated with the frame containing the card to be
accessed (in this example, “MFC-8320-N SN: 00108053”).
3.
As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example,
“Slot 6: CDI-9323-DEC RCVR21”).
.
As shown on the next page, when the card is accessed in DashBoard™
its function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
DB_ACCESS1.PNG
932X_DB_ACCESS2A.PNG