Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 62)

3
932X Group Function Submenu List and Descriptions
3-12 9323 GROUP PRODUCT MANUAL 9323G-OM (V4.6)
(continued)
• AES Unity Channel Selection Selects unity reset of AES Outputs Pairs 1-4 and 5-8 controls and
re-establishes default 1-to-1 routing as follows:
• Embedded: Routes Embedded Ch 1 thru Ch 16 as sources to
destination channels AES Ch 1 thru AES Ch 16.
• AES: Routes AES Ch 1 thru Ch 16 as sources to destination
channels AES Ch 1 thru AES Ch 16.
• Analog: Routes Analog Ch 1 thru Ch 8 as sources to destination
channels AES Ch 1 thru AES Ch 8. Sets AES Ch 9 thru Ch 16 to
Silence.
Applies embedded and AES unity channel selection (as set in the above
drop-down lists). To apply the selections, click the Confirm button. When
Confirm is clicked, a Confirm? pop-up appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
For any selection following confirm, the destination channel controls are
default reset as follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
• Tie AES and Embedded Controls When set to Enabled, gangs Gain, Phase, and Mute controls for
same-numbered Embedded and AES channels. Ganging is bilateral, with
Embedded channel control settings affecting corresponding AES channel
controls, and vice-versa.
• Audio/Video Sync Mode Control Provides for optimized audio/video syncing as follows:
• Minimum Video Delay – video is passed with minimum possible delay,
with disregard for maintaining delay to track with any noted audio delay.
• Matched Delays – video or audio delay is added as required to match
video and audio delays.
Table 3-2 932X Group Function Submenu List — continued