Cobalt Digital COMPASS 9322 HD_SD De-Embedder - Manual (Page 73)

9323G-OM (V4.6) 9323 GROUP PRODUCT MANUAL 3-23
Operating Instructions
932X Group Function Submenu List and Descriptions
(continued)
• Mono Mix as Source Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination AES channel.
(In this example, the mono content is the source for destination AES Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-35 for more information.
• Dolby ® Decoded Channel as Source (+DEC only) Dolby Ch 1 thru Dolby Ch 8 range in Source drop-down list
enables a Dolby
® decoded channel to be the source for the selected
destination AES channel.
(In this example, Dolby ® decoded Ch 1 is the source for destination AES
Ch 1)
Note: Drop-down choices of Ch 1 thru Ch 8 and Mix 1/Mix 2 represent
maximum channels available. Actual active channel complement is
per received Dolby
®
format and upstream encoding. Inactive
channels should not be used.
Refer to Dolby Decoder function description on page 3-30 for more
information.
Refer to Dolby ® E Processing and Routing Example on page 3-43
for an example of using and routing Dolby ® decoding.
• Tone Generator 1 thru 4 as Source Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination AES channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
AES Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-40 for
more information.
• Silence (Mute) as Source Silence selection in Source drop-down list mutes the selected destination
AES channel. Use this setting for unused destination channels.
(In this example, silence (muting) is applied to AES Ch 1)
• Gain (dB) Control Adjusts and displays relative gain (in dB) applied to the corresponding
destination AES channel.
(-80 to +40 dB range in 0.1 dB steps; unity = 0.0 dB)
Table 3-2 932X Group Function Submenu List — continued
•
•
•