Asus RX3042H - Manual (Page 103)

91
RX3042H User's Manual System Management
new password in the same upper and lower case characters
that you enter here.
3. Click on Apply button to save the new password.
10.2.2 Configure System Settings
Follow the steps below to modify system settings:
1. Open the System Administration configuration page, as shown in
Figure 10.2, by clicking the Router Setup ->Administration menu.
2. Clone the MAC address for WAN
a) If you had previously registered a specific MAC address with
your ISP for Internet access, check the Clone WAN MAC check
box and enter the registered MAC address here.
3. Allow Administration from WAN: check or uncheck the check box
to enable or disable remote management via WAN port.
4. Allow Ping Interface: This option allows user to control access
to the router using ping via the LAN or WAN ports. Check the
respective check box to enable ping from the respective interface.
5. Click on Apply button to save the settings.
10.3 Viewing System Information
System Information page displays whenever you log into RX3042H.
You may also click on the Status menu to see the system
information. This page shows information of the overall system
settings.