Asus RX3042H - Manual (Page 85)

RX3042H User's Manual Configuring Firewall
73
IP Address,
Subnet
Select any of these options and enter details as
described in the Source IP section above.
Service
Select a service, from the drop-down list, to which this rule
should apply. If the desired service is not listed, click on the
Edit button to create a new service.
Time
Select a time slot during which this rule should apply.
Enable
Check this box if you want to activate the ACL rule at the
time specified.
Date and Time Chck the desired dates and time for this ACL rule.
Table 9.4. Service Configuration Parameters
Field Description
Service Name
Enter a distinctive name identifying the new service.
Protocol
Select a protocol type from the drop-down list. Available options are All,
TCP, UDP, ICMP, IGMP, AH ESP and TCP/UDP.
Port Range
This option allows you to set the destination port to which this rule should
apply. Use the drop-down list to select one of the following options:
Any
Select this option if you want this rule to apply to all
applications with an arbitrary source port number.
Single This option allows you to apply this rule to an application
with a specific source port number.
Port Number Enter the source port number
Range Select this option if you want this rule to apply to
applications with this port range. The following fields
become available for entry when this option is selected.
Start Port Enter the starting port number of the range
End Port Enter the ending port number of the range