Asus RX3042H - Manual (Page 30)

Quick Start Guide RX3042H User's Manual
18
server).
• You maintain different subnets on your LAN.
However, during the first time configuration of your RX3042H, you
must assign an IP address in the 192.168.1.0 network for your
PC, say 192.168.1.2, in order to establish connection between the
RX3042H and your PC as the default LAN IP on RX3042H is pre-
configured as 192.168.1.1. Enter 255.255.255.0 for the subnet
mask and 192.168.1.1 for the default gateway. These settings may
be changed later to reflect your true network environment.
On each PC to which you want to assign static information, follow
the instructions on pages 11 through 12 relating only to checking
for and/or installing the IP protocol. Once it is installed, continue to
follow the instructions for displaying each of the Internet Protocol
(TCP/IP) properties. Instead of enabling dynamic assignment of the
IP addresses for the computer, DNS server, and default gateway,
click the radio buttons that enable you to enter the information
manually.
Note: Your PCs must have IP addresses that place
them in the same subnet as the RX3042Hʼs LAN
port. If you manually assign IP information to all your
LAN PCs, you can follow the instructions in Chapter
5 to change the LAN port IP address accordingly.
3.3 Part 3 — Quick Configuration of the RX3042H
In Part 3, you log into the Configuration Manager on the RX3042H
and configure basic settings for your router. Your ISP should
provide you with the necessary information to complete this step.
Note the intent here is to quickly get the RX3042H up and running,
instructions are concise. You may refer to corresponding chapters
for more details.
3.3.1 Setting Up the RX3042H
Follow these instructions to setup the RX3042H:
12.Before accessing the Configuration Manager in RX3042H, make
sure that the HTTP proxy setting is disabled in your browser. In
IE, click “Tools” -> “Internet Options...” -> “Connections” tab ->
“LAN settings...” and then uncheck “Use proxy server for your
LAN ...”