Asus RX3042H - Manual (Page 106)

94
System Management RX3042H User's Manual
Manager, click the Management ->Time Zone menu.
10.5 SNMP Setup
SNMP (Simple Network Management Protocol) as its name
suggests is used for network management. You may use the SNMP
configuration page to enable or disable the SNMP support.
10.5.1 SNMP Configuration Parameters
Table 10.1 describes the configuration parameters available for
SNMP setup.
Table 10.1. SNMP Configuration Parameters
Field Description
SNMP Enable Check this box to enable the SNMP support; otherwise,
uncheck this box.
RO Community
Name
Community string is a clear text string that is used as
password between the SNMP management station
and the Internet Security Router. This “Read Only”
community name is used by the SNMP management
station to read the settings in the Internet Security
Router.
RW Community
Name
Community string is a clear text string that is used
as password between the SNMP management
station and the Internet Security Router. This “Read
and Write” community name is used by the SNMP
management station to read and configure the
settings in the Internet Security Router.
Trap Address Trap message is sent by the Internet Security Router
to tell the SNMP management station that something
has happened on the Internet Security Router. This
field is used to enter the IP address of the SNMP
management station that is supposed to receive trap
messages from the Internet Security Router.
10.5.2 Configuring SNMP
1. Open the SNMP configuration page, as shown in Figure 10.5, by
clicking the Management ->SNMP menu.