Asus RX3042H - Manual (Page 89)

RX3042H User's Manual Confi guring Firewall
77
9.5.2 Modify an ACL Rule
To modify an inbound ACL rule, follow the instructions below:
1. Open the Outbound ACL Rule Configuration Page by clicking
Firewall/NAT ->ACL menu.
2. Click on the icon of the rule to be modifi ed in the inbound
ACL table or select the rule number from the ID drop-down list.
3. Make desired changes to any or all of the following fi elds: action,
source/destination IP, service, time and log. Please see Table 9.3
for explanation of these fi elds.
4. Click on the Modify button to modify this ACL rule. The new
settings for this ACL rule will then be displayed in the inbound
access control list table at the bottom half of the Inbound ACL
Confi guration page.
9.5.3 Delete an ACL Rule
To delete an inbound ACL rule, click on the in front of the rule to
be deleted.
9.5.4 Display ACL Rules
To see existing ACL rules, just open the ACL Rule Configuration
page by clicking Firewall/NAT ->ACL menu and then select a traffi c
direction from the T raffi c Direction drop-down list.
9.6 Confi guring Self-Access ACL Rules
–(Firewall/NAT ->Self-Access ACL)
Self-Access rules control access to/from the RX3042H itself. You
may use Self-Access Rule Configuration page, as illustrated in
Figure 9.7, to:
• Add a Self-Access rule
• Modify an existing Self-Access rule
• Delete an existing Self-Access rule
• View existing Self-Access rules