Asus RX3042H - Manual (Page 58)

DHCP Server Configuration RX3042H User's Manual
46
6.1.3 Configuring DHCP Server
Note: By default, the RX3042H is configured as a
DHCP server on the LAN side, with a predefined IP
address pool of 192.168.1.100 through 192.168.1.149
(subnet mask 255.255.255.0). To change this range
of addresses, follow the procedures described in this
section.
First, you must configure your PCs to accept DHCP information
assigned by a DHCP server:
1. Open the DHCP Server Configuration page, shown in Figure 6.1,
by clicking Advanced -> DHCP Server menu.
Figure 6.1. DHCP Server Configuration Page
2. Enter the information for the IP Address Pool (Begin/End
Address), Subnet Mask, Lease Time and Default Gateway IP
Address, fields; others, such as Primary/Secondary DNS Server
IP Address and Primary/Secondary WINS Server IP Address are
optional. However, it is recommended that you enter the primary
DNS server IP address in the space provided. You may enter
the LAN IP or your ISPʼs DNS IP in the primary DNS Server
IP Address field. Table 6.1 describes the DHCP configuration
parameters in detail.