Acer AB460 F1 - Manual (Page 365)

345
No-negotiation is chosen, then the speed of the link, FlowControl and
duplex modes can be configured. The parameters for this page are
shown in the following table.
Parameter Description
Port This displays the port number.
Mode This parameter allows you to select either Auto
Negotiation or No-negotiation .
Duplex This parameter allows you to select either Full Duplex
or Half Duplex .
Speed This parameter allows you to select the speed as 10
Mbps , 100 Mbps or 1 Gbps .
Flow Control
Admin Status This parmeter allows you to specify the Flow Control
Admin Status as either
Disabled , Trasmit Flow Control
Enabled , Receive Flow Control Enabled or both
Transmit and Receive Flow Control Enabled .
Flow Control
Operation Status This parameter displays the status of the flow control.
HOL Block
Prevention This parameter allows you to enable or disable Head of
Line block prevention.