Acer AB460 F1 - Manual (Page 405)

385
Multicast Filters
Clicking the M
ULTICAST
F
ILTERS
tab brings up the L2 M
ULTICAST
F
ILTER
C
ONFIGURATION
page, which allows you to set the filter configuration to
control the multicast packets that the switch needs to process. The
parameters for this page are shown in the following table.
Allowed Ports This parameter specifies the list of ports on which the
received packet, with the above set MAC address (if
received from the configured port) can be forwarded.
Status You can choose to set this configuration to any one of
the following types:
•
Other
– For entries currently in use, but whose
conditions remain different from the following values.
•
Permanent
– Entries that reside even after the restart
of the switch.
•
DeleteOnReset
– This deletes the entry on restart.
•
DeleteOnTimeout
– This deletes the entry on
expiration of the ageing timer.
Parameter Description