Acer AB460 F1 - Manual (Page 440)

4 Networking Switch Modules 420
Aggregation Effect This parameter specifies the Aggreation option as one
of the following:
• Advertise – When set to advertise and associated Area ID is
0.0.0.0, then the aggregated Type-5 are generated.
Otherwise if the associated Area ID is x.x.x.x (other than
0.0.0.0), then the aggregated Type-7 is generated in NSSA
x.x.x.x for the specified range.
• Do Not Advertise – When set to doNotAdvertise (2) and
associated Area ID is 0.0.0.0, then the Type-5 is not
generated for the specified range, while aggregated Type-
7 are generated in all attached NSSA. While if the
associated Area ID is x.x.x.x (other than 0.0.0.0), then the
Type-7 are not generated in NSSA x.x.x.x for the specified
range.
• Allow All – When set to allowAll and associated Area ID is
0.0.0.0, then the aggregated Type-5 are generated for the
specified range. In addition aggregated Type-7 are
generated in all attached NSSA for the specified range.
• Deny All – When set to denyAll neither Type-5 nor Type-7
will be generated for the specified range.
Translation This parameter enables or disables the translation.
Parameter Description