Acer AB460 F1 - Manual (Page 380)

4 Networking Switch Modules 360
RSTP
The RSTP link provides links to the following configuration pages:
•
“RSTP Global Settings” on page 360
• “RSTP Basic Settings” on page 361
• “Port Settings”
• “Port Status” on page 364
RSTP Global Settings
Clicking the G
LOBAL
S
ETTINGS
tab brings up the G
LOBAL
C
ONFIGURATION
page, which allows you to configure RSTP global parameters. The
parameters for this page are shown in the following table.
Parameter Description
System Control This parameter starts or Shutsdown RSTP in the switch.
Status This parameter allows you to enable/disable the
protocol at a global level on the switch.
Dynamic Path Cost
Calculation This parameter allows you to enable or disable the
D
YNAMIC P ATH C OST C ALCULATION .