Acer AB460 F1 - Manual (Page 429)

409
RIPng
The RIP6 link allows you perform RIPv6 related configuration for the
switch. This can be accomplished through the following two pages:
•
“RIP6 Interface” on page 409
• “Filters”
RIP6 Interface
Clicking the RIP6 I
NTERFACE
tab brings up the RIP6 I
NTERFACE
C
ONFIGURATION
page. The parameters for this page are shown in the
following table.
Parameter Description
Interface ID Specifies the Interface Id for which RIPv6 needs to be
configured.
Status This parameter specifies the administration status of
the interface.
Prof ID This parameter indicates the Index of the Address
Profile entry.
Metric Offset This parameter specifies the metric for the routes that
are being re-distributed.