Acer AB460 F1 - Manual (Page 369)

349
In addition, the B ASIC S ETTINGS page provides the configuration3 of
Bridge Mode ( Customer /Provider ) and the priority for tunneled STP
BPDUs. When you configure B
RIDGE
M
ODE TO
P
ROVIDER
, the Port Protocol
based classification and MAC-based classification on all ports must be
disabled.
Parameter Description
Garp System
Control This parameter starts or shuts down GARP in the
switch.
Learning Mode This parameter specifies the Learning Mode
(
Independent, Shared, Hybrid or VLAN Learning ).
VLAN Version This parameter specifies the VLAN version supported.
Maximum VLAN ID This parameter specifies the largest (4094) valid VLAN
ID, which this switch can accept, above which all will be
discarded.
Maximum
Supported VLANs This parameter specifies the maximum number of
VLANs that this device can scale.
Number of VLANs
in the System This parameter specifies the active number of VLANs
configured in the device.
MAC Based on All
Ports This parameter enables or disables the per Port MAC
based classification.
Port and Protocol
Based on all Ports This parameter enables or disables the per Port
Protocol based classification.