Acer AB460 F1 - Manual (Page 462)

4 Networking Switch Modules 442
RIP
Clicking the RIP tab brings up the RRD RIP C
ONFIGURATION
page, which
allows you to re-distribute the routes that are learnt through other
routing protocols to RIP. The parameters for this page are shown in the
following table.
Parameter Description
RIP Status This parameter enables or disables redistribution for
RIP.
Default Metric This parameter specifies the metric for the routes that
are being re-distributed.
Import You can use this parameter to choose to import Direct
routes, Static routes, OSPF routes and BGP routes to
RIP.
Route Tag Type This parameter describes whether a tag is manually
configured or automatically generated.
Route Tag This parameter indicates the route tag in case you
configure a manual option for the tag type.