Route aggregations – Acer AB460 F1 User Manual
Page 455
Advertising
435
Route Aggregations
Clicking the R
OUTE
A
GGR
tab brings up the BGP R
OUTE
A
GGREGATION
C
ONFIGURATION
page, which is used to aggregate and configure the
routes advertised by BGP. The parameters for this page are shown in
the following table.
Action
With this parameter you can choose either to
Allow
(not to filter) or
Deny
(Filter) for the above
configuration set.
Status
This parameter specifies the status of the entry.
Parameter
Description
ID
This parameter specifies the index to this table.
IP Address Prefix
This parameter specifies the IP address prefix that
needs to be aggregated.
Parameter
Description
Advertising