Acer AB460 F1 - Manual (Page 410)

4 Networking Switch Modules 390
IP Route
Clicking the IP R
OUTE
tab brings up the IP R
OUTE
C
ONFIGURATION
page,
which allows you to configure the static IP routes. The parameters for
this page are shown in the following table.
Parameter Description
Destination
Network This parameter specifies the network address for which
the route is being added.
Subnet Mask This parameter indicates the subnet mask for the
Destination Network address.
Acer This parameter denotes the Next Hop Acer to reach the
IP address.
Interface This parameter specifies the outgoing interface.
Distance (Metric) This parameter specifies the metric value of the
destination.