Xylem HandyLab 100 - Manual (Page 47)

HandyLab 100 Operation
47 ba77062d01 03/2014
If the memory is full The following window appears if all 500 storage locations are occupied:
You have the following options:
 To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value
display, confirm No.
4.5.2 Editing the measurement data memory
The contents of the manual measurement data memory can be shown
on the display.
The measurement data memory has a function to erase the entire con-
tents.
Editing the data memory The memory is edited in the menu, Storage & config/ Data storage. To
open the Storage & config menu, press the <F1
_
>[Menu] key in the
measured value display.
Open the manual memory directly with the <RCL> key.
Settings
Data storage full. Erase?
Yes
No
Warning
15.03.2014
010:00
Back
Menu item Setting/
function Explanation
Data storage /
Manual data storage /
Display - Displays all measurement
datasets page by page.
Further options:
 Scroll through the datas-
ets with < ><>.
 Quit the display with <F1>/
[Back].