Xylem Cond 1970i - Manual (Page 34)

Operation Cond 1970i
34 ba75692e01 01/2007
4.5.2 Saving automatically
The save interval (Int 1) determines the chronological interval between
automatic save processes.
After the fixed interval has expired, the current data record is transmit-
ted to the storage and to the interface.
Setting the
save interval:
The default setting for the save interval (Int 1) is OFF.
By this, the AutoStore function is switched off.
To switch the function on, set an interval (5 s, 10 s, 30 s, 1 min, 5 min,
10 min, 15 min, 30 min, 60 min):
1 Press the <RUN/ENTER> key and hold it down.
2 Press the <STO> key. Int 1 appears on the display.
3 Set the required interval between the saving procedures with
<
▲> <▼>.
4 Confirm with <RUN/ENTER>.
The number of free memory locations appears on the display.
5 As soon as all of the 500 storage locations are occupied,
AutoStore is terminated (Int 1 = OFF).
If there are not enough storage locations available for your
measurements:
– Output and backup the data storage (see page 36) and
– clear the memory (see page 40).
REL1
pH
Ident
No.
Time
Cal
d
O
AR
cm 1/
Tref25
TP
ARng nLF
°
C
cm S/
Sal
RCL
%
S
%
m
mg/ l
Oxi
Year
Day.Month
Tref20
LoBat Lin
Sal
TEC
Baud
K /
REL2
pH / mV
F
1 n t
Store
I
F O
Auto
REL1
I
pH
Ident
No.
Time
Cal
O
AR
cm 1/
Tref25
TP
ARng nLF
°
C
cm S/
Sal
RCL
%
S
%
m
mg/ l
Oxi
Year
Day.Month
Tref20
LoBat Lin
Sal
TEC
Baud
K /
REL2
pH / mV
E
9 4 9
Store
E R
Auto
F