Xylem Cond 1970i - Manual (Page 46)

Operation Cond 1970i
46 ba75692e01 01/2007
4.7 Configuration
You can adapt the measuring instrument to your individual require-
ments. To do this, the following parameters can be changed (the status
on delivery is marked in bold):
Note
You can leave the configuration menu at any time with <M> . The pa-
rameters that have already been changed are stored.
Baud rate
Baud rate 1200, 2400, 4800, 9600
Calibration interval (Int 3) 1 ... 180 ... 999 d
AutoRange ARng On or off
Reference temperature – 25 °C (TREF25)
– 20 °C (TREF20)
Date/time Any
1 Switch off the measuring instrument.
2 Press the <M> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display. The measuring
instrument then switches automatically to the setting of the
baud rate.
4 Select the required baud rate with <
▲> <▼>.
5 Confirm with <RUN/ENTER>. Int 3 appears on the display.
REL1 Store
RCL
Sal
mg/ l
ARng
O
TP
Oxi Cal AR
°
C
S
Year Ident
No. Day.Month
Tref25 Tref20
LoBat Lin nLF
Sal
pH
TEC
Auto
Time cm 1/
K / %
REL2
pH / mV
m cm S/
%
8 0 0 4 Baud